|
I suppose some of you
might be wondering why I have been writing about the Ubuntu Linux
operating system and Linux software. As I noted in last month's article
my laptop is now my sole computer. Although it has a Pentium 4 processor
it only has 512 MB of RAM. Naturally, that means it is incapable of
running Windows Vista. But it does easily run Ubuntu with more than
enough memory to do multi-tasking with no reduction in speed. I also
know that there are a number of the members of the SPCUG that use
computers that are running Windows 98 or Windows XP. The point is, that
it is not necessary to try to upgrade these computers to run Vista or to
buy a new computer. Instead you have the free alternative of installing
Ubuntu or another version of Linux. This article will discuss some of
the range of free Linux software and how easy it is to install it.
The original installation CD of Ubuntu
included the OpenOffice software. OpenOffice includes a word processor,
spreadsheet and presentation applications. These are fully compatible
with the components of Microsoft Office. I frequently receive documents
prepared in MS Word and they open directly into OpenOffice Writer. I can
edit, comment and save a copy in the OpenOffice format. Then I can
return the modified document to the originator in MS Word format with
all the edits and comments intact. The same is true for spreadsheets.
The OpenOffice presentationapplication (Impress) reads, writes and
modifies PowerPoint files as easily as Writer works with documents.
OpenOffice also includes a Drawing application. Drawing is an
application that I haven't used.
Other included software with Ubuntu are Ekiga
(internet phone software), Pidgeon (internet messenger), Evolution
(e-mail), and a remote desktop viewer. Graphics software includes the
F-Spot photo manager, GIMP Image Editor and Xsane scanner software.
Also, there is a CD burner, movie player for DVDs and two music players.
I grant you that the included software doesn't
always meet all the needs for many users. So Ubuntu has several ways of
installing additional software. I mentioned last month about installing
the drivers for my printer, scanner and the wireless modem. This month I
will continue with other applications that are the equivalent of those
that I used under Windows. The installation of these applications was
much easier than installing drivers for the accessory hardware.
The first step in installing any application
is to go to the Applications - Add/Remove menu. When this application
runs it provides you with a list of all the software available through
Ubuntu and its third-party providers. On the left side of the window are
listed various categories that you can highlight and the appropriate
applications are then listed on the right side. When you highlight a
specific application, a description appears in the lower portion of the
window. There is also a search box that you can use to find a specific
program or a group of programs.
Since I maintain my financial records on my
computer I wanted a financial program that ran under Ubuntu. Not knowing
the specific name, I just searched on the term "finances". This brought
up a list of financial software. One of the interesting aspects of the
Add/Remove application is that programs are rated based on feedback from
users using 1 to 5 stars. There was a 5 star application listed,
GNUcash, which can import files in the Quicken format. So I put a check
mark in the box by the application name and then clicked on the "Apply
Changes" button. This brought up another window for verification of the
changes to be made. After clicking on "OK", the application was
downloaded from the Internet and installed on the hard drive without any
further action on my part. A shortcut icon was also added to the Office
portion of the applications menu. There was no reboot required to
complete this process. After the installation, the "Add/Remove"
application reported the successful installation and remained open in
case I wanted to use it further.
My Windows financial software was Microsoft
Money. Supposedly it will export its data files in the Quicken format. I
did that and then copied the files from the Windows partition to the
Ubuntu partition. However, the import into GNUcash was not really
successful. I'm not sure why but I suspect there was information missing
which resulted in misidentification of some of the accounts. Anyway, I
selected an arbitrary date and entered opening balances for that date.
So now, it is working perfectly and is in agreement with my bank
balances. Using it is even somewhat easier than working with either
Money or Quicken. Plus, the price is right.
Another application that I needed for Ubuntu
was a genealogy program. Here again I was able to find a five star
program, GRAMPS. (Very appropriate name I thought.) It was also
available through the "Add/Remove" application so installation was
completed quickly. GRAMPS imports GED files as do many genealogy
programs. So I exported my files from my Windows software in the GED
format then copied the GED file to the Ubuntu partition. The import into
GRAMPS was
|
essentially a two-click operation.
Everything, including notes and references, were now available in an
Ubuntu application. GRAMPS also has more report formats than my Windows
software included. So I consider it a very successful replacement.
For quite some time I have used a PDA,
specifically a Sony Clie which runs Palm Pilot software. The Sony CD
loaded the Windows version to the hard drive and also included software
to synchronize with the PDA. Since I have considerable contact
information in the Clie along with many memoranda, I really wanted to be
able to run this under Ubuntu. In the System-Preferences menu there is a
selection for PalmOS devices. Now that sounded like it would be quite
simple to install the applications necessary to run the Clie. Clicking
on the selection runs the Gnome-Pilot application which helps the user
to determine the settings for synchronizing with the Clie.
Unfortunately, it could not find the Clie PDA. So I had to go back
online to the Ubuntu forums to see if I could find the secret. It turns
out that getting a PDA recognized and synced with Ubuntu is not always
simple. After spending considerable time reading various solutions I
came across a command line entry that showed the entries where my Clie
was being recognized by Ubuntu. The PDA was properly identified by
vendor and product ID's. Now all the information I had gathered
indicated that the PDA should be listed as using a USB connection and
usually ttyUSB0 and ttyUSB1. Much to my surprise my printout showed the
Clie as using ttyUSB9 and ttyUSB10. The Gnome-Pilot software refused to
accept either of these as valid locations. However, another application,
J-Pilot, accepted ttyUSB10 and synced with the Clie when the sync
button was clicked. The synchronization transferred all of my
information directly into the J-Pilot software. This software works on
the desktop in a very similar manner to the Clie and Pilot software I
had used under Windows. Successive synchronizations have also been
successful. So that was one less application that would need to run
under Windows.
There has been one big disappointment in the
hardware setup. I have a multi-function media card reader built into the
laptop. It reads SD cards as well as xD, MMC, and memory sticks. This
reader works great under Windows as a way to transfer photos from my
camera to the computer. However, there is apparently no driver available
for this to work under Ubuntu. The card reader is manufactured by 02
Micro and they apparently don't believe Linux is here to stay so they
have no plans to create Linux drivers for any of their products. At
least that's the quotation from a response to a query from a Ubuntu
user. So when I have photos to transfer to my computer I can either
reboot into Windows, or I can connect the camera with a USB cable. The
USB cable works fine as Ubuntu recognizes the camera right away. It also
opens the F-Spot Photo Manager which allows me to choose the pictures
and the location where I want them saved.
One of the applications included with Ubuntu
is Brasero, a CD/DVD burner. When I first tried to use it, it refused to
recognize my DVD+R discs. It would read and write DVD-R/RW with no
difficulty. Since I had a supply of the +R discs I decided to look for
other DVD burning software. In the ADD/Remove application there were
several CD/DVD burners listed. One of them was five star application
called K3B. It was written primarily to work with the KDE destop that is
an alternative to the GNOME desktop. The KDE desktop comes with Kubuntu
and has an interface that is closer to the one found in Windows.
Anyway, K3B will work with GNOME, so let ADD/Remove install it. Any
software that you add through Add/Remove can be removed simply by
locating it in the list and removing the checkmark that indicates it has
been installed. So now I have both Brasero and K3B installed. I also
found, the next time I wanted to burn a DVD, that Brasero would now work
with my external burner and the +R discs. I do like the interface for
K3B better than Brasero, but they both work.
As you can see one of the nice attributes of
using open license software is the ability to install it and use it at
no cost. If you don't like it, you simply remove it. It's certainly not
that simple in Windows. So, if you want to try a Linux OS on your
computer download a "Live CD" and try it out. Also check out the online
help forums. I think you'll find them easier to understand than much of
the material Microsoft makes available. Whatever you decide, enjoy your
computing!
*Dr. Lewis is a former university and
medical school professor of physiology. He has been working with
personal computers for over thirty years, developing software and
assembling systems. He can be reached at bwsail at yahoo.com.
Copyright 2008. This article is from the
October2008 issue of the Sarasota PC Monitor, the official monthly
publication of the Sarasota Personal Computer Users Group, Inc., P.O.
Box 15889, Sarasota, FL 34277-1889. Permission to reprint is granted
only to other non-profit computer user groups, provided proper credit is
given to the author and our publication.
|